---
title: "Hydrometer temperature correction calculator"
description: "Correct a hydrometer reading taken from warm or cold wort or beer to its true gravity, for the temperature your hydrometer is calibrated to."
url: https://www.fisherforbesbrewing.com/tools/hydrometer-temperature-correction/
publisher: Fisher & Forbes Brewing Co (https://www.fisherforbesbrewing.com)
---

# Hydrometer temperature correction calculator

A hydrometer only reads true at one temperature, usually 20°C. Took your reading from warm wort, or a cold sample? Enter the reading and the sample’s temperature, and see what the gravity really is.

The calculator itself works on the page: Hydrometer correction.

## How it works

Liquid gets thinner as it warms up, so a hydrometer sinks a little deeper in a warm sample and reads low. In a cold sample it floats higher and reads high. Each hydrometer is made to read true at one temperature, printed on it or its packet: usually 20°C, sometimes 15.6°C (60°F) on older or American ones.

The calculator uses the correction most homebrewers use, worked out from how the density of water changes with temperature, to turn your reading into what it would have been at your hydrometer’s temperature.

Near room temperature the difference is small, but it grows the hotter the sample: at 30°C a reading is about 3 points (0.003) low, at 40°C about 6. Above about 40°C the correction gets less dependable, so it’s best to cool the sample first.

## An example

On brew day it’s tempting to read the gravity before the wort has properly cooled. Say it reads 1.050 at 30°C on a hydrometer calibrated to 20°C: the true original gravity is about 1.053, and an ABV worked out from 1.050 would come out about 0.3% low.

Cold works the other way. A sample of finished beer straight from a cold crash at 4°C that reads 1.012 is really about 1.010.

## Questions

### What temperature is my hydrometer calibrated to?

It’s printed on the hydrometer itself, often on the paper scale inside it, or on its packet. Most are 20°C; some older or American ones are 15.6°C (60°F).

### Should I just cool the sample instead?

If you can, yes. A sample near the calibration temperature needs little or no correcting, and the correction gets less reliable above about 40°C. Pour the sample into the trial jar and let it stand, or stand the jar in cold water.

### How much difference does it make?

Near room temperature, very little: a point or two. But take your original gravity from hot wort and it can be five points out or more, which puts your ABV out by over half a percent.

### Does it work for a refractometer?

No, this is for hydrometers. Most refractometers correct for temperature themselves, and they need a different correction once fermentation has started, as alcohol throws their reading off.

---

Source: https://www.fisherforbesbrewing.com/tools/hydrometer-temperature-correction/
