---
title: "Sauvignon Plonk, a Sauvignon Blanc"
description: "We started with a wine: a six-bottle Beaverdale Sauvignon Blanc kit, to learn the process before risking 23 litres of beer."
url: https://www.fisherforbesbrewing.com/brew-journal/sauvignon-plonk/
date: 2025-09-13
author: "Darren Fisher"
publisher: Fisher & Forbes Brewing Co (https://www.fisherforbesbrewing.com)
---

# Sauvignon Plonk, a Sauvignon Blanc

## The numbers

- Brew 001: Sauvignon Blanc, wine kit (Beaverdale Sauvignon Blanc 6-bottle wine kit)
- Status: All gone
- Started 13 September 2025, bottled 5 October 2025, ready 5 December 2025
- Batch: 4.5 litres
- Original gravity 1.078, final gravity 0.990
- ABV 11.6% (from hydrometer readings)
- About 69kcal per 100ml (518kcal a 750ml bottle), estimated from the gravities

## Recipe

- Wine yeast (from the kit): 1 sachet
- Grape juice concentrate: 1 bag (Fermenter, topped up to 4.6 litres with water)
- Bentonite: 1 sachet (Before the yeast)
- Stabiliser: 1 sachet (Clearing)
- Kieselsol finings: 1 sachet (Clearing)
- Chitosan finings: 1 sachet (Clearing, 24 hours later)

## Process

- Fermentation: fermenting for 8 days
- Fermentation: clearing for 7 days
- Fermentation: polishing for 7 days
- Bottles: 6 × 750ml
- Reading 20 September 2025: 0.990 (fermentation looked finished)
- Reading 21 September 2025: 0.990 (steady; clearing started)

## Kit used

- Demijohns
- Plastic brewing spoon
- Large auto siphon (56cm)
- Thermometers
- Hydrometers
- Wine degassing tool
- Bottling wand
- 750ml screw-top wine bottles
- Bubbler airlocks
- Tubing
- Plastic bottling bucket
- Funnels
- 5L jug
- Food bag clips
- Demijohn corks
- Stick-on fermentation thermometers
- VWP cleanser
- Chemsan
- Spray bottles
- Sponge scourers
- Bottle brush
- Bottle rinser
- Bottle tree

## How it turned out

- First tasting: A perfectly drinkable Sauvignon Blanc. It’s not going to win any awards, but the six bottles disappeared very quickly. In Jaws they needed a bigger boat; in our house we just need a bigger batch!
- What we'd change: Be patient, and give it the full six months to mature in the bottle. That’s always going to be very hard for us!
- Brew it again: yes
- Rating: 3 out of 5

## Brew day
I know, I know: if the plan is to brew beer, why start with a white wine? Honestly, I was intimidated. I didn’t want to wreck 23 litres of beer on my first attempt, and in The Homebrew Shop I spotted a nifty little six-bottle Sauvignon Blanc kit from Beaverdale. My wife is a massive Sauvignon Blanc fan, so it seemed a good way to test the whole process without risking a big batch of beer. It would also give me something to bribe her with when she started complaining about buckets of fermenting beer everywhere later!

## The process

![Looking down into a white plastic fermenting bucket with a tap, full of the wine, a cloudy golden brown, on a kitchen worktop](./sauvignon-plonk/fermenting.jpg "In the fermenter, 2025")

There isn’t much to tell: it’s a basic beginners’ kit. The grape concentrate went into the fermenter, topped up to 4.6 litres with water, then the bentonite and the yeast, at 1.078 to start. By the 20th it read 0.990, below the kit’s 0.996 target, and it was still 0.990 the next day, so I started clearing it: degassing, the stabiliser and two rounds of finings. A week later it was transferred off the sediment to polish for another week, and on 5 October it went into six 750ml screw-top bottles.

Follow a good sanitising routine and the steps carefully, and you should end up with a drinkable wine at the end. The hardest part is waiting.

---

Source: https://www.fisherforbesbrewing.com/brew-journal/sauvignon-plonk/
